Update Galaxy Grand to Jelly Bean 4.1.2 XXAMCD Firmware

Galaxy Grand I9082

While most of you must not have heard of this device, it certainly does exist and it is not one of the most popular devices anyway. But that does not mean that the updates for this device will not be rolling out. Samsung just released an OTA update for Galaxy Grand to Jelly Bean 4.1.2 XXAMCD. The update has been rolled out in India and if you haven’t received yours, please follow the guide below to install it manually. Please note that this firmware can only be installed on the model number I9082. Before you begin you will need to ensure a few things. Firstly, please make sure that you have backed up your sensitive data because you will lose it.

Read More…

Install AOKP JB-MR1 Nightly Custom ROM on Galaxy Note 2

Galaxy Note II

There are many Custom ROMs available for any of the Android devices out there, which makes it a little hard to decide which is the best and which offers the most functionality. All you can do is experiment of course. We are here to tell you though how to make those experiments happen successfully and without a glitch. This particular tutorial will guide you on how to install AOKP JB-MR1 Nightly Custom ROM on Galaxy Note 2 which is based on the official Android 4.2.2 Jelly Bean.

Read More…

Install Jelly Bean 4.1.2 on Xperia S

Xperia S

Recently, the official Jelly Bean update was released for the Sony Xperia S updating the firware to 4.1.2. If you are using the device and have not yet received the update, you can manually install Jelly Bean 4.1.2 on Xperia S by following the guide below. The firmware will be upgraded to 6.2.A.0.200 Jelly Bean 4.1.2. You can do so quite easily using the Sony PC Companion Software. The update will bring to you a new walkman media app, Albums and movies with a lot more customizable widgets and apps. Moreover, Google Now and Project Butter has been implemented as well.

Read More…

Root Galaxy Tab 2 7.0 P3100 to Jelly Bean 4.1.2 XXCME2

Galaxy Tab 2

If you are using the Galaxy Tab 2, you can root it easily. This method employs the CF-Auto-Root, an exploit developed by the XDA members. Your device will be rooted to Android 4.1.2 XXCME2 Jelly Bean build after you successfully root it, which shouldn’t take more than ten minutes. All you need to do is follow the guidelines below. Before you begin though, you will need to have the correct USB drivers installed on your computer and ensure that the USB debugging mode is turned on. You also must ensure that you have at least 50% percent battery, and that is a general case with rooting anything, even the smallest of files.

Read More…

Install Jelly Bean 4.1.2 XXLT6 on Galaxy Note N7000

Samsung-Galaxy-N7000

Recently, Samsung released a new Android 4.1.2 Jelly Bean OTA update for the Galaxy Note N7000. It will flash the XXLT6 firmware onto your phone. If you haven’t received the update in your region, you can always do it manually and we are here to guide you on how to do just that. Rest assured that various bugs have been killed with this update and it brings a lot of smoothness to the device as well. Before you begin though, you need to ensure that you have at least 50% battery left and that you have the correct USB drivers.

Read More…

Root Galaxy S3 I9300 on Jelly Bean 4.1.2 XXEMD3 [How-To]

S3

Recently an OTA update was released for the Samsung Galaxy S3 I9300 for Android 4.1.2 XXEMD3. If you haven’t already updated your phone, you might want to check for updates and if you have, follow this tutorial in order to root Galaxy S3 I9300 on Jelly Bean 4.1.2. The process is highly simple,  just make sure you follow the steps as they are. Before you begin though, you need to ensure that you have at least 50% battery left and that you have the correct USB drivers. Please note that the tutorial makes use of CF-Auto-Root. Moreover, please know that this tutorial will be applicable to root Galaxy S3 device alone.

Read More…

Update Official Jelly Bean 4.1.2 XXLPZ on Galaxy S Advance I9070 [How-To]

Galaxy S Advance

One of the greatest points of owning an Android handset is running custom ROMs. But there are a few who prefer official ROMs over anything else because of performance and many other issues apparently. If you are one of those then you might want to update to the Official Jelly Bean XXLPZ on Galaxy S Advance I9070 which is available Over-the-Air. If you haven’t received the update, you can follow this tutorial in order to update your phone no matter what region you are in. Remember that this tutorial will only work for Galaxy S Advance.

Read More…

Update CM10.1 RC5 on Google Nexus 7 Running Jelly Bean 4.2.2

Nexus 7

The users of Asus Google Nexus 7 are currently powered by Android 4.2.2 Jelly Bean and while many would stick with the official updates, there are loads who who go for Custom ROMs. One such custom build is the CyanogenMod 10.1 (CM10.1). They have released the 5th candidate and of course there is a long way for them to go to perfect this built. You can now install the CM10.1 RC5 on Google Nexus 7 based on Jelly Bean 4.2.2 Firmware following this tutorial. Please know that this tutorial will only work for the Google Nexus 7 and do not try this on any other device.

Read More…

Update Galaxy S2 i777 with UCMD8

Galaxy S2

The new firmware to update Galaxy S2 i777 with UCMD8 was recently released. The update fixes various bugs and comes with a lot of enhancements and of course the Jelly Bean tag. If you haven’t already updated your phone, this particular tutorial will guide you on how to that step-by-step. Please do not use the downloaded files for any other device as they are tailored to install jelly Bean on this device only. before you begin, you will need to ensure that you have the correct USB drivers installed and that your device is rooted. Moreover, please backup your data as there are chances of you losing it. Please ensure that the USB debugging mode is on and that you at least have 50% battery. If you are ready, please follow the tutorial below.

Read More…

Update Galaxy Tab 2 7.0 P3100 with Android 4.1.2 XXCME2 [How-To]

Galaxy Tab

Samsung recently started rolling out another firmware to update Galaxy Tab 2 7.0 P3100 with Android 4.1.2 Jelly Bean. The update is already available in Southeast Asian countries and brings loads of bug fixes and feature enhancements. The update is available to download Over-The-Air and Samsung Kies. If you missed the OTA of course, you can always use Samsung KIES to download the update. If you are not sure exactly how do to that, following this step-by-step guide will help you do that easily. Before you begin, please ensure that you have the correct USB drivers and the the USB debugging mode is on. Moreover, please ensure at least 50% battery is available and that you backup your data in case you lose it while the update is in progress. If you are ready, please follow the guide after the break.

Read More…